Installation skills and precautions for off-road vehicle roof lights
By Carol
July 13th, 2021
669 views
Many off-road vehicle owners like to travel by car, and especially like to travel through areas with relatively few people. Installing a set of high-performance LED roof lights is an indispensable equipment to deal with sudden changes in climate. Some off-road vehicle owners like the cool style of the roof lights. Even if they rarely go crazy in the wild, they drive to the outskirts with friends on weekends, have a PART party, turn on the LED roof lights, and they will illuminate a square and have fun with friends Carnival is also standard equipment.
First, you need to buy an LED work light and LED light bar suitable for your car model. According to the style of your car and the preferences of the owner, choose LED work lights and LED lights bar of moderate size, square and round, and the smaller ones are called LED work lights. They are usually installed in pairs on the front insurance bracket of the car. One pair can be installed, or the front body of the rear-view mirror can be installed. It is usually installed in a row of 3 to 4 on the roof. If there is a luggage rack on the roof, it can be installed on the luggage rack. The long strips are called LED lights bar, which are mainly installed on the top of the car body. Some shorter size LED light bars can be installed at the car intake grille.
After determining the installation position, select the required LED work lights and LED light bar according to the size. The performance of the lamps is very important. Many LED work lights and LED lights bar on the market have average performance, and they are all exported to the Middle East market. , The quality is uneven, ordinary car owners and users who do not have the requirement of crossing mountains and ridges can purchase relatively cheap ones. For users with high requirements, especially users who use 200W or more, they must buy high-performance LED work lights and LED lights bar, high power and large size, poor quality not only affect the use, but also have a great impact on the safety of the car body and driving safety.
The mounting bracket must be firm. If you plan to install the off-road vehicle roof light, don’t be afraid of drilling and electric welding. Let the master install it as firm as possible, especially the more powerful, important and heavier lamps. Stability is the first thing to ensure, under the premise of ensuring stability , As beautiful as possible.
Connect the wiring to the power supply. If you buy a high-power 200W or more, you should consider the battery capacity of the car. The battery capacity of the car battery is too small and needs to be replaced with a larger one, or the whole car can be modified with LED lights, which can also save a lot of power for your modification. Up. When the LED work lights and LED light bars are connected to the car power circuit, independent fuse and switch must be installed. If the LED lamp comes with a wireless switch, one more mechanical switch should be added. The car should have a switch position before leaving the factory. If the LED roof light power cord is equipped with a waterproof plug, it also needs to be wrapped. When entering the car, avoid pressing the door when opening and closing the car. Do not reserve too long a wire outside the car to avoid accidentally hanging it in the future.
Power-on test, adjust the angle of the LED lamps, the range of the LED work lights and LED lights bar is about 50-100 meters, adjust the angle you need to the appropriate lighting requirements, remember to tighten the mounting screws. During normal use, check regularly to see if the screws are loose.
Previous
What are the common off-road vehicle modification classifications?
Read More
Next
The basic selection and installation points of lamps
Read More
